濟南防水http://www.stxcw.cn/介紹在高壓灌漿堵漏中，灌漿孔的布孔是個技術活，灌漿孔的好壞，直接影響到后續的注漿工作以及堵漏施工的效果。下面濟南天宇建防水的有關專家給大家介紹一下布置堵漏孔的方法。
1、灌漿孔的設計
濟南防水談到灌漿孔一般分為騎縫和斜孔兩種形式，在選擇灌漿孔的位置時，應使孔和漏水裂縫空隙相交，并選在漏水量最大處。
Speaking Jinan waterproof grout holes are generally divided into two types of roulette and slant-hole, filling holes in the choice of location should make the holes and gaps leaking cracks intersect, and at the election in the largest leak.

2、布孔的規則
濟南防水http://www.stxcw.cn/建議注漿孔眼的位置和數量，需根據不同漏水情況進行合理安排，以導出漏水為目的，在集中漏水處布孔，裂縫大、水流量大則孔距大，縫隙小則孔距小。
Jinan waterproof proposal grouting hole location and number, the need for reasonable arrangements depending on the leaks, leaks to export for the purpose of concentrating cloth hole leaks, cracks big, big water flow the pitch, the pitch and little small gap.